$AR 328.65

ENC28J60 Cantidad $AR 328.65
Detalles del Producto

The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20MHz.
It is a module by which you can put your control board online. And of course you can use it on the Arduino platform. Its function is the same as Ethernet Shield V1.0 for Arduino, so with it you can realize all the functions that you did on the Ethernet Shield V1.0 for Arduino. It is tiny and convenient, you need to connect it with your Arduino board with 10 wires, then you can use it like the Ethernet Shield V1.0 for Arduino.


ENC28J60 Ethernet chips, SOP28 package
SPI Interface
2x5 connector, can be easily mounted with the MCU
Built-in isolation transformer RJ45 connectors HR911102A
Power LED
Single Supply: +3.3 V
25Mhz Crystal
PCB size: 55x36 mm

Conexión a Arduino y puesta en marcha

To use it on the Arduino, you can connect it on to the Arduino board directly .In this way, you connect the RESET pin to the RESET of Arduino, connect the ENC-INT pin to the digital 2 of Arduino, connect SCK, MISO, MOSI, CS-EN to the SPI port of Arduino, and don't forget to connect the VCC(3.3V) and GND.

ENC28J60 Module Arduino Due/UNO Arduino Mega
VCC 3V3 3V3
SCK 13 52
MISO 12 50
MOSI 11 51
CS 10 53

After that, you can connect the Enc28j60 module to your PC through a net cable, and then you can start testing the module. In order to test the module, you should first download Ehernet_ENCJ60 (Ver documentación). Extract it and put it in the folder arduino-0022libraries.

Open the Arduino IDE, find the example webserverpde:

Change the code:

Change the code:

static uint8_t mymac[6] = {0x54,0x55,0x58,0x10,0x00,0x24}; // set the MAC address
static uint8_t myip[4] = {192,168,0,15}; //Set IP
static char baseurl[]=""; //Set IP, same as above
static uint16_t mywwwport =80; //Set port, usually 80

Upload the program to Arduino.

Please do not forget to configure the IP on your local PC:

On Windows OS, open Control Panel--Network and Internet--Network Connections, double click Local Area Connection (the one your ENCJ60 module connected to)

Click Internet Protocol Version 4 (TCP/IPv4) and then Properties

Click OK to apply.

Open one brower and input:

Contacto - Consultas
Tel.: 11-3024-2446
Whatsapp: 54-9-11-3024-2446

Higrometro TA-328 - Refractometro Aceite | 0 - 27 Brix - Electrodo Combinado de ORP de Platino para uso general, HI 3230B - Medidor PH Tipo Lapiz con Autocalibración, Hold, ATC Y Termometro - 0 ~ 14pH - Sensor De Temperatura Y Humedad Alta Precision AM1001 - Servo SG90 9g - Termohigrometro Datalogger Usb KG100, temperatura y humedad - Luxometro TES 200.000 lux TES-1332A - Boroscopio / Endoscopio USB 5mpx c/ Accesorios - Arduino DUE R3 - Balanza Ohaus Scout Pro SP123 - Tacometro de Contacto - Higrometro Mini - max/mix - Pack x3 Buffers para pH 4.01, 7.00 y 10,01 Secos - Refractometro Aceite | 0 - 27 Brix -

Con cobre con PagoFacil RapiPago y BaproPagos!
Valores expresados en Pesos AR
e-LABShop ® | |
Tel: 11-3024-2446 | Whatsapp +54-9-11-3024-2446